The CPC1000 is the most economical deburring system available. Gone are the long process times of tumblers and vibratory finishers. With its 1 cu.ft. capacity, the CPC1000 can reach speed in excess of 250RPM*, processing parts quickly and consistently. The system can deburr and finish parts up to 6.5" x 9.5". Equipped with United's exclusive PLC and Touchscreen control, precision finishes are at your fingertips. Processes can be stored and recalled for consistent results every time. Generates up to 27Gs.
The CPC1000 is considered the most versatile deburring machine for small and medium size parts. If a part can fit inside the barrel, it can be deburred, polished, radiused, or descaled to specification. Once the process is set, repeatability is over 99%. That cannot be said of any other type of deburring machine. This unit is preferred in the medical industry over all other deburring machines due to its size and versatility. The aerospace industry prefers centrifugal barrel finishing over vibratory deburring machines due to controlled, precise material removal. With removable barrels, several different parts can be processed with different medias at the same time. Stop using deburring tools or deburring wheels and stop wasting time hand deburring.
The CPC1000's direct drive system utilizes motorcycle chain for durability and performance. Removable panels make it simple to access all parts of the unit for maintenance. Its 1:1 ratio allows each barrel to retain its loading position, increasing productivity and ergonomics.
The CPC1000 uses simple controls. Jog controls are accessed through one touch and give the operator full control over the turret. United's exclusive touchscreen and PLC controls have process storage capabilities, which allow operators to quickly recall past processes to ensure consistency among all runs. If a new process is being run, the manual operation screen is also available.
Barrels are locked with a simple lid and cam system, ensuring parts are secure. No tools needed. Up to 2 barrels can be loaded into each cradle. They are securely locked using United's locking cam system. Barrels are available in 2 sizes, 1/4 cubic foot volume and 1/8 cubic foot volume. Parts and barrels can be removed in under 10 seconds. Up to 8 barrels can be loaded with parts, media, compound, and water with ease. Because of United's urethane liners, barrels can be relined without needing to be sent to a third-party.ked with a simple lid and cam system. No tools needed.
Fully Integrated Motor Controls
Removable Body Panels
Stainless Steel Construction
Urethane Barrel Linings
Cam Barrel Locks
Complies with ANSI/NFPA 70 and NFPA 79 Codes UL Approved
*May require upgrades based on process requirements.
*Internet Explorer not supported.Close