CPC500 Deburring Machine
High Power for Small Parts
Unlike tumbling machines, the CPC500 Centrifugal Barrel Finishing System is consistent and fast. It can deburr small parts 10 times faster than any vibratory tumbler with more consistency and precision. Deburring parts and separating them from tumbling media is also faster than vibratory deburring. With additional barrels on standby, parts and media can be changed in less than a minute. Due to its smaller barrels, the CPC500 consumes less media and compound than Mini Harperizers or other vertical barrel finishers.
Features
The CPC500 deburring machine is inexpensive, compact, and efficient. It is quiet enough to operate in an office environment. Ideal for deburring small parts and low volume production. Parts up to 5" x 4.5" can easily be processed in this unit. Smaller parts like dental components or screw components can be processed by the thousands.
The CPC500's direct drive system utilizes cleated belts which optimize performance and minimize noise and vibration. Removable panels make it simple to access all parts of the unit for maintenance.
Barrel liners are locked with a simple locking latch. No tools needed. Parts and liners can be removed in under 10 seconds. All four barrels can be loaded with parts, media, compound, and water in under a minute.
Touchscreen Controls
User-friendly touchscreen display.
Process storage capabilities.
Process countdown timer.
Safety
Manual turret jogging.
Door lock prevents door from being opened while machine is running.
Emergency stop button.
Variable Speed
Up to 300RPM*
Process versatility.
Gentle on delicate parts.
Removable Barrel Liners
Reload barrels in seconds.
Can load extra barrels while others are processing.
Easy relining - no need to disassemble machine.
Fully Integrated Motor Controls
Easy to operate.
Safe - operator has no access to line voltage.
Improved motor protection.
Removable Body Panels
Easy access for maintenance.
Replaceable panels, no need for bodywork or welding.
Easy cleaning.
Stainless Steel Construction
Prevents corrosion from moisture.
Equipment lasts longer.
Urethane Barrel Linings
Greater traction increases energy transferred to the media.
Greater process efficiency.
Improved heat resistance.
Barrel Locks
No tools required to open barrel.
Increased operator convenience.
Reduced reloading time.
Warranty
Up to 3 years, determined by component type.
Complies with ANSI/NFPA 70 and NFPA 79 Codes UL Approved
Nationally accepted safety standards.
Trusted safeguards for operators and equipment.
Standardized design.
*May require upgrades based on process requirements.
Specifications
Total Capacity
0.500 Cubic Feet | 14.16 Liters
Barrel Capacity
0.125 Cubic Feet
Barrel Dimensions
W 6” (15.25cm) x H 6.75” (17.15cm)
Machine Dimensions
W 32” x H 51” x D 32”
User Interface
Touchscreen with Process Storage
Main Drive/Motor
2HP, Inverter-Controlled, Single-Phase
Turret Speed
0-300 RPM*, Fully Adjustable
Operating Volume
Under 70 Decibels
Construction
Machine: 304 Stainless Steel
Barrels: Coated Steel with Urethane Liner
Power Requirements
208/230 (± 10%) VAC, 50/60Hz, 1Ø, 30A UL certified
Compressed Air
Not required.
Dry Floor Compatible
Yes
Warranty
Up to 3 years, determined by component.
Options
Extra Barrel Liners